научный журнал
Электронная обработка материалов
ISSN 0013-5739 (Print) 2345-1718 (Online)

Том 56 (2020), Номер 2, стр. 49-54

https://doi.org/10.5281/zenodo.3747835

Получение целлюлозы из льняного волокна с использованием электроразрядной объемной кавитации

Малюшевская А.П., Малюшевский П.П., Ющишина А.Н.


Аннотация

УДК 676.16:537.528

 

На примере льняного волокна исследованы процессы получения целлюлозы из недревесных растительных материалов электроразрядным методом. Рассмотрена адаптация электро-разрядного способа воздействия на материалы к решению задачи делигнификации и получения целлюлозы из волокон однолетних растений. Описаны условия, при которых электрический разряд в воде сопровождается комплексом явлений, характерных для кавитационных процессов в жидкости. Экспериментально установлены энергетические режимы и схемы электроразрядной обработки льняного волокна, позволяющие получить выход α-целлюлозы на уровне 70–83%. Выявлено, что повышение энергии в единичном электроразрядном импульсе свыше 125 Дж нецелесообразно для получения максимального содержания α-целлюлозы. Показано также, что для максимального выхода α-целлюлозы необходимо предварительное замачивание льняного волокна. Отказ от использования химических реагентов для делигнификации льноволокна электроразрядным способом делает его перспективной альтернативой экологически небезопасным существующим.

 

Ключевые слова: льняное волокно, делигнификация, α-целлюлоза, электроразрядная объемная кавитация

 

 

The producing of cellulose from non-woody plant materials using the electric discharge method was investigated using flax fiber as the object. The adaptation of the electric-discharge method of the material treatment to the solution of the problem of delignification and the production of cellulose from the fibers of annual plants is considered. The conditions are described when an electric discharge in water is accompanied by a complex of phenomena characteristic of cavitation processes in a liquid. Energy operating rates and main elements of engineering procedures for electric-discharge treatment of flax fiber are experimentally established. Their compliance allows the yield of α-cellulose to be about 70–83%. It was experimentally revealed that increasing the energy in a single electric-discharge pulse above 125 J is not advisable from the point of view of the maximal content of α-cellulose. It was also experimentally shown that in order to get the maximal yield of α-cellulose, preliminary soaking of flax fiber is necessary. Non-using of chemical reagents for delignification of flax fiber during the electric discharge method makes it a promising alternative to environmentally unsafe existing ones.

 

Keywords: flax fiber, delignification, α-cellulose, electric-discharge volume cavitation

 

 

 
 

Скачать полнотекстовый PDF. 2153 скачиваний

Web-Design Web-Development SEO - eJoom Software. All rights reserved.